Jump to content

Flashing blue LEDs inside Majik DSM/2


Recommended Posts

I had previously noticed, and again last night when I turned the room lights off, that in standby there are still at least two flashing blue LEDs inside the Majik, visible through the ventilation slots.

They also shine through the hdmi sockets and onto the wall behind. I checked again today and they still flash when it's fully on and playing. I switched the exakt link LEDs on and can see that they flash in sync with numbers 1 & 3 (where left to right they are numbered 0,1,2,3).

I am not running an Exakt set-up.

Is this normal or something to worry about?

Link to comment
Share on other sites

Its normal.

No idea what they're doing though. Akurate Kontrol/0 has something similar.

Link to comment
Share on other sites

42 minutes ago, psj said:

Blue? Are they Exakt LED’s at the back? You might be able to turn it off in Konfig as this is possible with Akurate DSM.

I have to put a plastic card over Majik  Exackbox-i socket as this is not configurable.

They are inside the casing, and seem to flash continuously, whether Majik is in Standby or switched On. Exact LED's are generally switched off, but if I switch them on in Konfig, 2 of them are flashing at the same rate as the one's inside the casework.

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...