Wanted 20A mains cable. 2 metres minimum.

[Pure_Carbon]

Looking for a 20A mains cable , to work with my Krell.
Something better than the standard supplied kettle lead.
2 metres as it has to reach a clean wall socket.
I do have a closer 8 block filter but been told , maybe erroneously, needs it's own wall plug.

 

[Audio Al]

You may find all the sockets are on the same ring main.

 

[Beobloke]

Why do you need a 20A mains cable? Assuming you're in the UK, the socket can only provide 13A.

 

[rabski]

By 20A, possibly we are referring to the connector type, as in C19. They're higher rated, though the amplifier won't take anything near 20 amps.

 

[Pure_Carbon]

Yes. C19 connector, rather than the standard kettle configuration .
@Audio Al , yes , I'm certain all the living room sockets are on the same ring , so a shorter one, maybe 1.5m could work, but i'd rather go 2m.

 

[ACS]

Looking for a 20A mains cable , to work with my Krell.
Something better than the standard supplied kettle lead.
2 metres as it has to reach a clean wall socket.
I do have a closer 8 block filter but been told , maybe erroneously, needs it's own wall plug.

Have a look at this from Lindy.

https://www.lindy.co.uk/cables-adap...3-pin-plug-to-iec-c19-power-cable-black-p9231

 

[g8ina]

For 20A you can use 1.5mm cable. Twin & earth is OK, and I also have a batch of UK mains colour coded armoured cable, which is a bit inflexible but has made some decent mains cables with a C19 Rhodium plug on one end. For a small consideration I can send you a 2m length or a made up cable with the IEC C19 one end and a new UK mains plug on the other ...