Consider a good sub, eg. BK monolith plus DF - in walnut or whatever TBH
Will throw in some aurum cantus g2si super tweeters, in a veneered box (not as pretty as speakers) with an adjustment level as well, uses a high quality cap inside..can add some air to the sound.
Handmade by me using lii audio fast 10
drivers.
30mm thick MR MDF (the best) cabinets
Combo of pure silver and copper internally wired, soldered using silver solder.
Hifi collective jantzen connectors
Spikes in the stands for the floor.
These are bloody heavy and need alot of care to move, to avoid damage to you and the cabinets.
They Have amazing weight, clarity and imaging (single driver)
I drive them using my 8watt valve amp, never turned past 10 on the dial, I would say about 95db efficient or thereabouts.
I am happy to swap for other hifi - valve amps, turntables, subs that sort of thing.
Please no speakers!!
Obvs collection only.
These are now disassembled and stored...obviously I am prepared to set up basically for a demo.
It's much easier to move and avoids accidentally putting your fingers through the cones.
I have rubbed them down and they will need a wax...I am happy to do it before you come.
Will throw in some aurum cantus g2si super tweeters, in a veneered box (not as pretty as speakers) with an adjustment level as well, uses a high quality cap inside..can add some air to the sound.
Handmade by me using lii audio fast 10
drivers.
30mm thick MR MDF (the best) cabinets
Combo of pure silver and copper internally wired, soldered using silver solder.
Hifi collective jantzen connectors
Spikes in the stands for the floor.
These are bloody heavy and need alot of care to move, to avoid damage to you and the cabinets.
They Have amazing weight, clarity and imaging (single driver)
I drive them using my 8watt valve amp, never turned past 10 on the dial, I would say about 95db efficient or thereabouts.
I am happy to swap for other hifi - valve amps, turntables, subs that sort of thing.
Please no speakers!!
Obvs collection only.
These are now disassembled and stored...obviously I am prepared to set up basically for a demo.
It's much easier to move and avoids accidentally putting your fingers through the cones.
I have rubbed them down and they will need a wax...I am happy to do it before you come.
Attachments
-
DSC_0977_compress9.jpg225.5 KB · Views: 69
-
DSC_0978_compress65.jpg236.3 KB · Views: 73
-
DSC_0979_compress97.jpg234.3 KB · Views: 69
-
DSC_0980_compress23.jpg203.9 KB · Views: 66
-
DSC_0981_compress50.jpg169.8 KB · Views: 63
-
DSC_0983_compress81.jpg106.2 KB · Views: 63
-
DSC_0348_compress27.jpg334.1 KB · Views: 5
-
DSC_0349_compress50.jpg186.4 KB · Views: 5
-
DSC_0351_compress92.jpg342.7 KB · Views: 5
Last edited: