@tarkus2 has one of these amps for sale and I’ve expressed my interest in buying It.
I think there are enough inputs for my needs (see below) but I’m confused as to whether there is a signal out function that allows a recording device such as a minidisc recorder.
I need to connect the following:
tuner - analogue via RCAs
CD - to be purchased
Tascam MD 350 recorder which has RCA and toslink in and out (ie 2 of each - one for play: one for record)
Chromecast Audio device - connecting to the coax input
The specification from the website says this
mINT Features
Can a further power amp be connected to this integrated in future? This isn’t essential if it has plenty of drive
It would be used on Boenicke W5 speakers but not at loud levels. It would replace an ATC SIACD all in one using a smaller footprint
thanks!
I think there are enough inputs for my needs (see below) but I’m confused as to whether there is a signal out function that allows a recording device such as a minidisc recorder.
I need to connect the following:
tuner - analogue via RCAs
CD - to be purchased
Tascam MD 350 recorder which has RCA and toslink in and out (ie 2 of each - one for play: one for record)
Chromecast Audio device - connecting to the coax input
The specification from the website says this
mINT Features
- Built-in ESS Sabre DAC
- 24/96kHz USB input
- 24/192 Toslink and Coaxial input
- No drivers required
- 2 sets of gold plated unbalanced (RCA) inputs
- 2 sets of gold plated unbalanced (RCA) outputs (For use with a powered sub, etc.)
- 100 watt per channel power amp (8 ohms)
- Differential design
- Headphone amp
- Fully functional remote control
- 12V DC Trigger input (to automatically activate HT Bypass mode)
- 12V DC Trigger output
- Home Theater bypass
- Extremely low noise floor
- True Resistive-Ladder volume control
- Extremely low Idle power consumption
- Rugged construction
- ½” Machined and anodized front panel
- 66kΩ input impedance
- External selectable mains 115/230VAC
- Compact size (8”W x3.5”H x 8”D)
- 9 lbs.
Can a further power amp be connected to this integrated in future? This isn’t essential if it has plenty of drive
It would be used on Boenicke W5 speakers but not at loud levels. It would replace an ATC SIACD all in one using a smaller footprint
thanks!