For Sale: Ex BBC Technics SP10, fully serviced, ply plinth, AT1503 Mk2 Tonearm, Tenutu Mat.

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
For Sale: Ex BBC Technics SP10, fully serviced, ply plinth, AT1503 Mk2 Tonearm, Tenutu Mat.

This was the SP10 Mk2 turntable used at BBC Radio Jersey (have various documentation to support this). 

It has been: fully serviced by ‘Phonomac’ to Angus’s usual high standards. 

What work has been done / is included:

Power coating of the chassis (there’s a couple of marks but it’s pretty good). 
 

It’s been placed in a solid plywood Denon DK100 plinth. The Denon badge has been left on in case a Denon Cartridge is used with this arm, but the badge could of course be removed if required.   

It therefore overcomes the SP10’s only downfall (IMO) in that this SP10 comes with a lid, which is easily lift-offable when in use.

The tonearm is the AT-1503 mk2 tonearm, which is the heavy mass consumer version of the highly regarded of the ATP-12t professional tonearm.

The Puresound Tenutu matt is also included, and improves the turntables performance significantly (google this if you have not heard of it). I already have a buyer for this if the new SP10 owner doesn't want it.

The Headshell is an Audio Technica AT-MS Limited Edition one, and can be adjusted for both overhang and VTA. 

I can include the tonearm cable which came with the AT1503 mk2 (free of charge), if required. 

No cartridge is included (though the AT150 Ltd edition is shown in the photo’s - which has already been sold). There are plenty of low compliance ‘classic’ and modern cartridges that will match this arm, and I can give advice on cartridge matching if required.

I also have three cartridges for sale, and will discount one of these if purchased with the turntable. 

This is a genuine sale, as I have moved more away from vinyl and more into streaming now (and a friend has just given me for a couple years use / storage whilst he’s emigrated, a heavy mass plinthed Lenco GL75 / PMAT AT1005 Mk2 / DL-103R   :D )
 

For sale at £1750 including the Tenutu mat, or £1500 without the Tenutu. 
 

This is collection only from Nottingham NG9 (a few minutes from Junction 25, M1).

Enquiries by pm please and pics to follow in a few mins.

Thank you.

 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Sorry guys, just uploaded two photo's, there shown as uploaded, and still not at my upload able limit, so no idea why photo's not showing. }

Will try and go the photobucketshop route instead!

 

orbscure

My God, its full of stars...
Wammer Plus
Aug 22, 2013
14,068
1
35,072
208
57
SE London/Surrey
HiFi Trade?
  1. No
Images visible... so you don't get the post police on your case :)  GLWTS...

SP_2.JPG


SP_1.JPG


SU_1A.jpg


SP_5.JPG


 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Just to clarify:

The old traditional BBC SH-10E unit is not included and is no longer required, as the SH10E power supply has been fitted with the correct logic board. ie it now runs and functions as a 'normal' SP10   .... bump.

 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Now looking to split this up, pricing as follows … 

Enquiries, more photo’s, or any other questions by pm please. 

Refurbished Technics SP10 Mk2  + Technics SH-10E Power Supply                         £900 incl P&P
(no plinth, arm, headshell or Tenutu)

Or 

Refurbished Technics SP10 Mk2  + SH-10E Power Supply + Tenutu Mat                 £1150 incl P&P
(no plinth or arm)

If the Tenutu doesn’t sell within a week from now, it will be offered for sale at        £250 incl P&P
(Andy already has first dibs on this). 

Denon Dk100 plinth on it’s own, to fit SP10 Mk2 &  AT1503 Mk2 (or would fit an ATP-12t)
                                                                                                                                        £125 incl P&P. 

Note:
Please note the arm as it turns out is NOT the AT1503 mk2 which I was told it was!
It is the better / rarer / longer version, which is AT1501 mk2 :)
But which of course will not fit correctly in this plinth - quite embarrassing!

These are believed to be the consumer versions of the highly regarded ATP-12t / ATP-16t tonearms - check them out!
Pivot to spindle on these is 270mm, Effective length is 282mm.

AT1501 mk2 tonearm + tonearm cable + free headshell                                            £325   incl P&P.
(the free headshell is non-branded, and has overhang adjustment but not vta adjustment)

Audio Technica MS-11 Ltd Edition Headshell                                                              £80 incl P&P.
(overhang and vta adjustment)

Denon Dl-103R (only 100 hours careful use).                                                              £200 incl P&P
Works superbly with the above arm.        

 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Thanks for the enquiry. To clarify, mine has had the following done:

- BBC logic board replaced with standard one to function as stand-alone unit
- Both motor unit and psu fully recapped
- psu voltages set to specification
- motor unit calibrated for speed/phase-lock control
- brake adjusted
- there is no strobe fitted.
 
Best wishes.
Keith

 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
The Tenutu is now SOLD (thanks Andy). 

Off to you know where to auction today, but I'd rather sell to a wammer / fishie / AoS member ... bump.

 

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Thanks Oliver. 

Oops - Should have said the SP10, Tenutu and Headshell are all sold. 

The AT1501 mk2 tonearm, plinth and Dl-103R are still available. 

 
Last edited by a moderator:
  • Like
Reactions: Bigman80

itskeith

Wammer
Wammer
May 19, 2012
462
26
43
Nottingham
Quick update ... bump. 

AT1501 tonearm now SOLD, 

SP10 Plinth now SOLD, 

Dl-103R (100 hrs) reduced to £185 incl postage.

 

Forum statistics

Threads
113,444
Messages
2,451,263
Members
70,783
Latest member
reg66

Latest Articles

Wammers Online