diy

As my new speakers like a lot of power these matched pair ( left and right ) 80’s build monoblocks are up for grabs. Personally I like the industrial look but I understand that some won’t like them. Some have said they could be monoblock versions of the musical fidelity p170 , others have said...

Hi All... So i have a massive AV amp powering little Mission speakers and im starting to feel guilty about the power drain as this thing gets HOT! So i started looking at a class D high power amp and found the following ICEPOWER module: https://www.profusionplc.com/parts/icepower250asx2 Then...

I would like to share my 3D printed Naim Aro inspired uni pivot tone arm. This tone arm is very easy to build and parts will cost you less then a quick stop at the pub ;) It's a fun project for owners of a 3D printer (or you might have friend that own one) and I want to share all print files...

M50/s Pre amp Line in and a DAC . Input 1 DAC. 3 Line, Output 2 Non Balance Pre. 1 Balance Pre, SECA HP Again supplied with cct and BOM. Cost £100 + P&P This project for DIYer is based on the Q20 circuit but it can give you power level greater than 50W. The top PCB is the Power Amp...

So just asking if any one has a opinion , i have been getting back in to some tunes on my old hifi , re ossitioning things etc , theres quiet a lot of it, mini disks dard drives etc , but was going to do some cleaning or plugs , leads etc , yes you can buy the russ andrews wet wipes sort of...

One speaker stopped working after transport to a friend's house and unbolting the unit we discovered this! For a competent person (not me) can this be re-soldered to the drive unit easy enough or is it FUBAR'd. Until this situation arose, unit was fine with no known issues and played without...

So whatis it with speaker baffle edges? Squared off? Rounded? If rounded, is it a small rad or a large rad?  Should your baffle be wide or narrow? Which is better for imaging? Width determines where a crossover needs baffle step to balance edge dispersion effects, but which part of the...

This was originally built by JamieMC of this parish but bought off the ebay about half year ago. Great pre amp if you have sensitive speakers and needs bit of gain - i have tried to run off dac but it just dotn work out for me so I guess it needs matching preamp or more sensitive speakers - mine...